2021 Inspection Results -

Repair details are on the bottom of this page below the overview. 

If you have questions about repairs please save them for Tuesday at the Repair Tent.

Car Number Type Division VIP
R700 Rally Stock no
R702 Rally Stock VIP
R703 Rally Stock VIP
R704 Rally Stock VIP
R705 Rally Stock VIP
R707 Rally Stock VIP
R708 Rally Stock VIP
R709 Rally Stock VIP
R711 Rally Stock VIP
R712 Rally Stock VIP
R713 Rally Stock no
R714 Rally Stock VIP
R715 Rally Stock VIP
R716 Rally Stock VIP
R717 Rally Stock VIP
R718 Rally Stock VIP
R719 Rally Stock VIP
R720 Rally Stock no
R721 Rally Stock VIP
R722 Rally Stock VIP
R723 Rally Stock VIP
R724 Rally Stock no
R725 Rally Stock no
R726 Rally Stock VIP
R727 Rally Stock VIP
R728 Rally Stock VIP
R729 Rally Stock VIP
R730 Rally Stock VIP
R731 Rally Stock VIP
R732 Rally Stock VIP
R733 Rally Stock no
R734 Rally Stock VIP
R735 Rally Stock VIP
R736 Rally Stock no
R737 Rally Stock VIP
R738 Rally Stock VIP
R739 Rally Stock no
R740 Rally Stock VIP


Car No. = R700,    Rally,    Stock    NON VIP

  • Failed item 15. "Brake pad installed per plans, Photos 7.1 & 7.4".   Reason -> brake pad has been cut
  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R702,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R703,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R704,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R705,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R707,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R708,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R709,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R711,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R712,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R713,    Rally,    Stock    NON VIP

  • Failed item 3. "Bushing installed per plans , Photo 3.5 & 3.7 ".   Reason -> missing 1 1/2 washer
  • Failed item 4. "Front kingpin washer stack per plans , Photo 3.17".   Reason -> missing 1 1/2 washer
  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R714,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R715,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R716,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R717,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R718,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R719,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R720,    Rally,    Stock    NON VIP

  • Failed item 4. "Front kingpin washer stack per plans , Photo 3.17".   Reason -> remove N washers
  • Failed item 5. "Rear kingpin washer stack per plans, Photo 3.19 ".   Reason -> remove N washers
  • Failed item 15. "Brake pad installed per plans, Photos 7.1 & 7.4".   Reason -> replace brake pad
  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R721,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R722,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R723,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R724,    Rally,    Stock    NON VIP

  • Failed item 5. "Rear kingpin washer stack per plans, Photo 3.19 ".   Reason -> need N washers
  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R725,    Rally,    Stock    NON VIP

  • Failed item 29. "Optional rear and side foam installed per plans, Photo E22.5".   Reason -> altered form
  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R726,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R727,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R728,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  •  item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R729,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R730,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R731,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R732,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R733,    Rally,    Stock    NON VIP

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!
  • Failed item 39. "All-American Soap Box Derby Logo, Photo 13.1 (all views) ".   Reason -> nose too long


Car No. = R734,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  •  item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R735,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R736,    Rally,    Stock    NON VIP

  • Failed item 8. "Cable pulley hardware per plans, Photo 5.5 ".   Reason -> Wrong eye bolt in axle
  • Failed item 17. "Brake pedal hardware per plans, Photos 8.4, 8.12 & 8.18 ".   Reason -> need cable clamp on brake cable
  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!item 32. "Shell circumference of 39-1/2 inches,  ".   Reason ->
  • Check after body installed !!


Car No. = R737,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R738,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R739,    Rally,    Stock    NON VIP

  • Failed item 15. "Brake pad installed per plans, Photos 7.1 & 7.4".   Reason -> change brake pad
  • Failed item 17. "Brake pedal hardware per plans, Photos 8.4, 8.12 & 8.18 ".   Reason -> missing nut on brake pedal
  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!


Car No. = R740,    Rally,    Stock    VIP   But the following will be checked after shell installation

  • item 30. "Screw in nose of the shell, Photo 12.11".   Reason -> Check after body installed !!
  • item 31. "Shell flush with bottom of floorboard ,  ".   Reason -> Check after body installed !!
  • item 32. "Shell circumference of 39-1/2 inches,  ".   Reason -> Check after body installed !!