2021 Inspection Results -
Repair details are on the bottom of this page below the overview. 

If you have questions about repairs please save them for Tuesday at the Repair Tent.

Car Number Type Division VIP
1 Local Master no
2 Local Master no
3 Local Master VIP
4 Local Master no
5 Local Master VIP
6 Local Master no
7 Local Master no
8 Local Master VIP
9 Local Master VIP
10 Local Master VIP
11 Local Master no
12 Local Master VIP
13 Local Master no
14 Local Master VIP
15 Local Master no
16 Local Master VIP
17 Local Master VIP
18 Local Master VIP
19 Local Master VIP
20 Local Master no
21 Local Master VIP
22 Local Master VIP
23 Local Master VIP
24 Local Master VIP
25 Local Master VIP
26 Local Master VIP
27 Local Master VIP
28 Local Master notdone
29 Local Master VIP
30 Local Master no
31 Local Master VIP
32 Local Master VIP
33 Local Master VIP
34 Local Master no

 


Car No. = 01,    Local,    Master    NON VIP

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!
  • Failed item 5. "Helmet, First rivet must be visible".   Reason -> check cheek form
  • Failed item 15. "Axle Mounting Plates, AASBD issued. AASBD logo must be visible".   Reason -> cut excess off bolts. remove top washer.
  • Failed item 23. "Brake Pedal, 3/4 inch plywood or pivot style brake".   Reason -> Cable not double-clamped
  • Failed item 26. "Foot Brace, Required 3/4x3/4x3 inch minimum size".   Reason -> missing set screw on cable clamp
  • Failed item 40. "Installed per Directions, Brake cable double looped & double clamped".   Reason ->


Car No. = 02,   Local,    Master    NON VIP

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!
  • Failed item 15. "Axle Mounting Plates, AASBD issued. AASBD logo must be visible".   Reason -> rear axle too high


Car No. = 03,   Local,    Master    VIP   But the following will be checked after shell installation

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!


Car No. = 04,    Local,    Master    NON VIP

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!
  • Failed item 6. "Helmet Width, cannot change shape of helmet when put into headrest;7-1/4 inches outside between rivets".   Reason -> Does not meet 7 or 7 ¼
  • Failed item 7. "Helmet Cutout, 7 inches wide to first rivet".   Reason ->
  • Failed item 15. "Axle Mounting Plates, AASBD issued. AASBD logo must be visible".   Reason -> No axle stops.
  • Failed item 16. "Axle Mounting Plates, first plate may be epoxied to floorboard".   Reason -> Does not meet 3-inch rule.
  • Failed item 19. "Alternate Rear Axle Mounting Assembly, installed w/carriage or hex bolts and nuts AASBD issued".   Reason -> not AASBD bolts
  • Failed item 33. "Adjustable, 10 pounds minimum (with wing nuts)".   Reason -> cut bolt


Car No. = 05,    Local,    Master    VIP   But the following will be checked after shell installation

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!


Car No. = 06,    Local,    Master    NON VIP

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!
  • Failed item 15. "Axle Mounting Plates, AASBD issued. AASBD logo must be visible".   Reason -> front need plates. AASBD logo must be visible.
  • Failed item 32. "Bolts, 5/16 inch bolts".   Reason -> cut rear bolt.


Car No. = 07,    Local,    Master    NON VIP

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!
  • Failed item 9. "Hinge, AASBD issued".   Reason -> cut bolts.
  • Failed item 32. "Bolts, 5/16 inch bolts".   Reason -> wts not allowed in front of mounting plate
  • Failed item 33. "Adjustable, 10 pounds minimum (with wing nuts)".   Reason -> cut rear wt bolt. move front wt bolt forward.


Car No. = 08,    Local,    Master    VIP   But the following will be checked after shell installation

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!


Car No. = 09,    Local,    Master    VIP   But the following will be checked after shell installation

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!


Car No. = 10,    Local,    Master    VIP   But the following will be checked after shell installation

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!


Car No. = 11,    Local,    Master    NON VIP

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!
  • Failed item 6. "Helmet Width, cannot change shape of helmet when put into headrest;7-1/4 inches outside between rivets".   Reason -> need foam
  • Failed item 9. "Hinge, AASBD issued".   Reason -> cut bolts
  • Failed item 21. "Turning Radius, 3/8 inch minimum, 1 inch maximum each direction".   Reason -> missing large washer
  • Failed item 32. "Bolts, 5/16 inch bolts".   Reason -> paint lead & cut bolt in back


Car No. = 12,    Local,    Master    VIP   But the following will be checked after shell installation

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!


Car No. = 13,    Local,    Master    NON VIP

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!
  • Failed item 15. "Axle Mounting Plates, AASBD issued. AASBD logo must be visible".   Reason -> no logo visible on front
  • Failed item 17. "Kingpins, AASBD issued kingpins and bushings only".   Reason -> too many washers on front & rear king pin stack


Car No. = 14,    Local,    Master    VIP   But the following will be checked after shell installation

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!


Car No. = 15,    Local,    Master    NON VIP

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!
  • Failed item 15. "Axle Mounting Plates, AASBD issued. AASBD logo must be visible".   Reason -> Cut off bolts on front plate
  • Failed item 24. "Brake Facing, New AASBD brake pad installed".   Reason -> Need new pad and lock washers are missing on blue steering/brake mount
  • Failed item 33. "Adjustable, 10 pounds minimum (with wing nuts)".   Reason -> Front weight needs to be moved


Car No. = 16,    Local,    Master    VIP   But the following will be checked after shell installation

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!


Car No. = 17,    Local,    Master    VIP   But the following will be checked after shell installation

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!


Car No. = 18,    Local,    Master    VIP   But the following will be checked after shell installation

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!


Car No. = 19,    Local,    Master    VIP   But the following will be checked after shell installation

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!


Car No. = 20,    Local,    Master    NON VIP

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!
  • Failed item 17. "Kingpins, AASBD issued kingpins and bushings only".   Reason -> To many washers, nut not flush
  • Failed item 27. "Date, 2004 to present".   Reason -> Both 2016
  • Failed item 31. "Mountings, Four 3/16 inch holes per axle".   Reason -> Remove Foam


Car No. = 21,    Local,    Master    VIP   But the following will be checked after shell installation

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!


Car No. = 22,    Local,    Master    VIP   But the following will be checked after shell installation

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!


Car No. = 23,    Local,    Master    VIP   But the following will be checked after shell installation

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!


Car No. = 24,    Local,    Master    VIP   But the following will be checked after shell installation

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!


Car No. = 25,    Local,    Master    VIP   But the following will be checked after shell installation

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!


Car No. = 26,    Local,    Master    VIP   But the following will be checked after shell installation

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!


Car No. = 27,    Local,    Master    VIP   But the following will be checked after shell installation

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!


Car No. = 28,    Local,    Master    NON VIP

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!
  • Failed item 15. "Axle Mounting Plates, AASBD issued. AASBD logo must be visible".   Reason -> rear axle plate both does not meet 3"


Car No. = 29,    Local,    Master    VIP   But the following will be checked after shell installation

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!


Car No. = 30,    Local,    Master    NON VIP

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!
  • Failed item 13. "Shape, No alterations".   Reason -> rebuilt floorboard


Car No. = 31,    Local,    Master    VIP   But the following will be checked after shell installation

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!


Car No. = 32,    Local,    Master    VIP   But the following will be checked after shell installation

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!


Car No. = 33,    Local,    Master    VIP   But the following will be checked after shell installation

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!


Car No. = 34,    Local,    Master    NON VIP

  • item 2. "Nose Height, 8-1/2 inches high, 4-1/2 inches back minimum".   Reason -> Check after body installed!
  • Failed item 15. "Axle Mounting Plates, AASBD issued. AASBD logo must be visible".   Reason -> front foot rest hitting body